SPooI Arch Rubber ExPansion Joint

Classification：

Rubber Expansion Joint

Summary

Message

PRODUCT DETAILS

SA60 Series Expansion Joint is hand made spool arch design with 1 or up to 4 arches. The split retaining rings are in galvanized carbon steel or in stainless steel, drilled according to DIN,ANSI,BS or as required. Reinforcement by high quality synthetic fabric and spiral steel wire .The sealing surface of the rubber flanges provide a fluid and gas tight seal and makes the use of gasket unnecessary.

Features & Benefits:

1.Hand made spool arch design.

2.High strength reinforced steel wire embeded into the body for high pressure.

3.Made of synthetic elastomers,reinfoced with nylon & metal internal rings for strength.

4.Both filled and unfilled arch available.

MateriaI List

Item No.	Parts Name	Parts Material
1	cover	EPDM
2	Reinforcing Fabric	Nylon
3	Reinforcing Wire	Steel
4	Tube	EPDM
5	Split Retaining Rings	carbon Steel

Dimensions(mm/in)

Size		Neutral Length		Max. Pressure	Max. Vacuum	Max Temp.	Allowable Movement
Size		Neutral Length		Max. Pressure	Max. Vacuum	Max Temp.	Axial		Deflection
DN	Inch	mm	(in.)	(P.S.I.G)	(in.Hg)	。F	comp.	Ext.	Lateral	Angular
DN	Inch	mm	(in.)	(P.S.I.G)	(in.Hg)	。F	(in.)	(in.)	(in.)	(。)
DN50	2	150	6	165	26	250	7/16	1/4	1/2	35
DN65	2-1/2	150	6	165	26	250	7/16	1/4	1/2	30
DN80	3	150	6	165	26	250	7/16	1/4	1/2	30
DN100	4	150	6	165	26	250	7/16	1/4	1/2	25
DN125	5	150	6	165	26	250	7/16	1/4	1/2	25
DN150	6	150	6	165	26	250	7/16	1/4	1/2	20
DN200	8	150	6	140	26	250	11/16	3/8	1/2	20
DN250	10	200	8	140	26	250	11/16	3/8	1/2	15
DN300	12	200	8	140	26	250	11/16	3/8	1/2	15
DN350	14	200	8	85	15	250	11/16	3/8	1/2	12
DN400	16	200	8	65	15	250	11/16	3/8	1/2	12
DN450	18	200	8	65	15	250	11/16	3/8	1/2	9
DN500	20	200	8	65	15	250	13/16	7/16	1/2	9
DN600	24	250	10	65	15	250	13/16	7/16	1/2	9